DELL AE515 User Manual

Dell Professional Sound Bar  
AE515  
User’s Guide  
Regulatory model: AE515  
Contents  
3
What’s in the box  
NOTE: The documents that shipped with the speaker  
may vary based on your region.  
4
1
3
2
1
Audio cable  
Documents  
2
4
USB cable  
Sound bar  
3
4
 
Features  
10  
9
1
2
3
8
7
6
5
4
1
Call pick up  
Microphone  
6
7
Aux-in  
2
Volume down  
3
4
Call hang up  
8
9
Microphone  
Volume up  
Default Playback  
button  
5
Headphone  
10 Mic mute  
5
 
Setting up your speaker  
Installing the Sound bar to your Dell monitor  
1
Hold the sound bar and push the hook into the monitor slot.  
2
Slide the sound bar to the right to engage the hook into the monitor slot.  
6
     
Powering on your speaker  
If the sound bar is not detected, connect the uplink cable that  
NOTE:  
came with your Dell monitor. Connect one end of the uplink cable to the  
USB port on the Dell monitor and the other end to the USB port on your  
Dell computer.  
1
Plug the USB cable connected to the sound bar into the USB port of the  
Dell Monitor.  
2
The sound bar will automatically power on once the system is powered up.  
The light on the right of the sound bar turns solid white.  
7
Connecting your speaker  
Use the audio in or aux-in jack to connect your audio device (tablet, smart phone)  
to your Dell sound bar.  
Audio-in port  
You can play audio using the audio-in cable that came with your speaker.  
1
2
3
Connect the audio-in cable to the aux-in port on the left sound bar.  
Connect the other end of the audio-in cable to your audio device.  
Play music and adjust the volume as desired.  
When audio in is the default playback device, the light on the  
NOTE:  
microphone button turns solid red. The sound bar microphone cannot  
be used in this playback mode.  
8
   
Headphone jack  
1
2
3
Connect the headphone to the headphone jack on the sound bar.  
Play music and adjust the volume as desired.  
Press the Default playback button on the left side of the sound bar to toggle  
between the speaker and headphone.  
The Default playback button is disabled when the headphone is  
NOTE:  
not connected to the sound bar.  
9
Answering Skype for Business  
calls  
1
Press the call button.  
NOTE: The light indicator on Call pick-up button slow blinks when there  
is an incoming call on Skype for Business and other supported software.  
Press the call hang-up button to end the call.  
Press the mic mute button to mute the microphone on the sound bar.  
Pressing the mic mute button again will unmute the microphone on the sound  
bar.  
2
3
Answering a call  
Muting the mic  
Hang-up the call  
10  
 
Making Skype for Business calls  
1
Press the call button to open up Skype for Business.  
Initiate a call via the Skype for Business application on your computer.  
Press the call hang-up button to end the call.  
Press the mic mute button to mute the microphone on the sound bar.  
Pressing the mic mute button again will unmute the microphone on the sound  
bar.  
2
3
4
Making a call  
Muting the mic  
Hang-up the call  
11  
 
Adjusting the volume  
1
Press the + button to turn the volume up. A soft dual tone can be heard  
when the speaker is at the maximum volume.  
2
Press the - button to turn the volume down. A soft single tone can be heard  
when the speaker is at the minimum volume.  
Volume up  
Volume down  
12  
 
Troubleshooting  
Problems  
No sound  
Possible causes  
No sound from the  
external audio  
source  
Possible solutions  
Check if the 3.5 mm aux-in  
cable is inserted in the  
speaker aux-in port.  
Unplug the 3.5 mm aux-in  
cable from the aux-in jack  
and insert the cable again.  
Check if the audio source is  
powered on.  
Make sure that the audio  
device volume is not set to  
0%.  
Try a known good speaker or  
audio source.  
Abnormal sound  
Distorted or buzzing  
sound  
Clear any obstructions  
between the sound bar and  
the user.  
In aux-in mode, ensure that  
the 3.5 mm plug is  
completely inserted on the  
aux-in port of the sound  
card.  
Decrease the volume of the  
audio application or music  
player.  
Turn the volume level to  
lower setting by pressing the  
- button on the sound bar.  
Test the speaker using  
another audio source (for  
example, a portable CD  
player or an MP3 player).  
13  
 
Unbalanced sound  
output  
Sound is coming  
from only one side  
of the sound bar  
Clear any obstructions  
between the sound bar and  
the user.  
In aux-in mode, ensure that  
the 3.5 mm plug is  
completely inserted in the  
aux-in port of the sound bar  
or audio source.  
Set the Windows audio  
balance controls for left and  
right speaker.  
Clean and reseat all cables.  
Test the sound bar using  
another audio source (for  
example, a portable CD  
player or an MP3 player).  
Low volume  
Volume is too low  
Clear any obstructions  
between the sound bar and  
the user.  
Turn the volume to a higher  
level by pressing the +  
button on the sound bar.  
Set all Windows volume  
controls to their maximum.  
Increase the volume of the  
audio application.  
Test the sound bar using  
another audio source (for  
example, a portable CD  
player or an MP3 player).  
Aux-in no sound  
No sound using the  
aux-in mode  
Make sure that the aux-in  
cable is properly plugged in  
the sound bar aux-in port and  
to the aux-out jack of the  
audio device.  
14  
Try a known good aux-in  
cable.  
Check if the audio device is  
powered on or is playing  
music.  
Make sure that the audio  
device volume is not set to  
0%.  
Try a known good speaker or  
audio source.  
Aux-in distortion  
Aux-in cable is not  
properly plugged in  
Clear any obstructions  
between the sound bar and  
the user.  
Ensure that the aux-in plug is  
completely inserted into the  
aux-out port of the audio  
source.  
Decrease the volume of the  
audio source.  
Turn the volume level to a  
lower setting by pressing the  
- button on the sound bar.  
Clean and reseat the cables.  
Make sure no loose objects  
are touching the sound bar.  
Headphone jack is  
connected, but no  
sound is heard  
Computer audio  
player is playing  
Make sure that the platform  
music player audio volume is  
not set to 0%  
Increase the volume of the  
sound bar.  
Press the default playback  
function button on the sound  
bar.  
15  
Headphone abnormal Audio distortion  
sound  
Check if the headphone plug  
is properly inserted into the  
speaker headphone jack.  
Check if the headphone plug  
has intermittent connection.  
Check if the music file is not  
distorted when playing  
without the headphone or  
connected to a known good  
headphone.  
16  
Specifications  
General  
Model number  
Connection type  
AE515  
USB cable  
Audio cable  
Electrical  
Operating voltage  
Operating current  
5 V  
500 mA  
Audio Input  
Audio Input  
Analog Audio Aux-in (3.5mm jack)  
2 x 1.8W @ ≤10% THD (USB3.0)  
2 x 1.0W @ ≤10% THD (USB2.0)  
84dB 3dB  
Output Power  
SPL  
Physical Characteristics  
Sound bar dimensions:  
Width  
Height  
Depth  
Weight  
443 mm (17.441 in)  
35 mm (1.378 in)  
60.43 mm (2.379 in)  
440 g (0.97 lb)  
17  
 
Statutory information  
Warranty  
Limited warranty and return policies  
Dell-branded products carry a 1-year limited hardware warranty. If purchased together with  
a Dell system, it will follow the system warranty.  
For U.S. customers:  
This purchase and your use of this product are subject to Dell’s end user agreement, which  
you can find at Dell.com/terms. This document contains a binding arbitration clause.  
For European, Middle Eastern and African customers:  
Dell-branded products that are sold and used are subject to applicable national consumer  
legal rights, the terms of any retailer sale agreement that you have entered into (which will  
apply between you and the retailer) and Dell’s end user contract terms.  
Dell may also provide an additional hardware warranty—full details of the Dell end user  
contract and warranty terms can be found by going to Dell.com, selecting your country  
from the list at the bottom of the “home” page and then clicking the “terms and  
conditions” link for the end user terms or the “support” link for the warranty terms.  
For non-U.S. customers:  
Dell-branded products that are sold and used are subject to applicable national consumer  
legal rights, the terms of any retailer sale agreement that you have entered into (which will  
apply between you and the retailer) and Dell’s warranty terms. Dell may also provide an  
additional hardware warranty  
—full details of Dell’s warranty terms can be found by going to Dell.com, selecting your  
country from the list at the bottom of the “home” page and then clicking the “terms and  
conditions” link or the “support” link for the warranty terms.  
18  
   

Royal Sovereign Arp 1200m User Manual
Panasonic Cu W12ekr User Manual
MAKITA JR3070CT 02 User Manual
JVC DX T66UW User Manual
GE AJ806 User Manual
EPSON AL M400DN User Manual
CRAFTSMAN 917.270940 User Manual
CRAFTSMAN 580.752012 User Manual
BROTHER HL 4570CDW User Manual
BLACK DECKER XD1200 User Manual